上海一锻机床制造有限公司
电话：021-69131113
传真：021-69130113
邮编：201816
网址：www.syduan.com
网店：sjcc131517.1688.com
地址：上海市嘉定区华亭镇霜竹公路830号
性能特点：
◆优质钢板焊接机身，均经过回火、抛光处理、刚性好、精度稳定；
◆曲轴纵置、结构紧凑、曲轴经高频火后磨消处理,光洁度好，转动灵活；
◆矩形六面加长导轨，导向面青铜镶板，导向精度高；
◆气动双平衡缸，平衡滑块和上模重量,降低冲击和噪音,消除连杆与滑块间隙减少受力零件冲击与磨损；
◆采用进口PLC集中控制，气路选用进口安全双联阀控制；
◆滑块、导轨、工作台板、连杆、接套等关键部件均采用树脂砂铸造；
◆60T及以上吨位采用电动调节装模高度，精品配置，关键部件均选用进口部件。
Performance Features:
◆Quality steel welded body, have been tempered, polished, rigidity, accuracy and stability;
◆Longitudinal crankshaft, compact structure,crankshaft grinding after the elimination of high-frequency fire treatment, good finish, flexible rotation;
◆Six side lengthen rectangular rails, guide surface bronze panels, high guide precision;
◆Pneumatic double-balanced cylinders, balance slider and upper die weight, reduce shock and noise, eliminating the gap between the link and the slider; Reducing the impact of stress and wear parts;
◆Imported PLC centralized control, gas selection of imported safety duplex valve control; The key components
◆Slider rails, table plate, rod, nipple etc. are used resin sand casting;
◆60T and above the tonnage Die height with electric adjustment, fine configuration, the key components are imported parts.
标准配置： ◆干式离合制动器； ◆液压过载保护装置； ◆电动黄油润滑装置(JH21-125T-400T)； ◆手动稀有润滑装置； ◆滑块及上模平衡装置； ◆误送检知接口； ◆触摸屏（JH21-125T-400T）； ◆电子式曲轴角度指示器（JH21-125T-400T）； ◆凸轮控制器； ◆电动滑块调整装置（JH21-60T-400T）； ◆可编程控制器； ◆滑块上部脱料装置； ◆空气源快速接头； ◆防震垫。 | Standard configuration: ◆Dry-type clutch and brake; ◆Hydraulic overload protection device; ◆Electric grease lubrication device(JH21-125T-400T); ◆Manual lubrication means rare; ◆The slider and the upper die balancing device; ◆Miss-feed detector interfaces; ◆Touchscreen(JH21-125T-400T); ◆Electronic crank angle indicator(JH21-125T-400T); ◆Cam controller; ◆Electric slide adjuster(JH21-60T-40OT); ◆Programmable Controllers; ◆Slide the upper portion of the stripper unit; ◆Air source quick connector; ◆Earthquake pad. |
淘宝旺旺
